Materials structure & micromechanics of fracture VII : selected, peer reviewed papers from the 7th International Conference on Materials Structure & Micromechanics of Fracture (MSMF-7), July 1-3, 2013, Brno, Czech Republic /
Saved in:
| Meeting name: | International Conference on Materials Structure & Micromechanics of Fracture (7th : 2013 : Brno, Czech Republic), issuing body. |
|---|---|
| Imprint: | Durnten-Zurich, Switzerland : Trans Tech Publications Ltd, [2014] ©2014 |
| Description: | 1 online resource (827 pages) : illustrations (some color) |
| Language: | English |
| Series: | Key engineering materials, 1662-9795 ; volume 592-593 Key engineering materials ; v. 592-593. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11215437 |
Table of Contents:
- Microscopic Mechanism of Hydrogen Embrittlement in Fatigue and Fracture
- 3D Studies of Indentation by Combined X-Ray Tomography and Digital Volume Correlation
- Influence of Microstructure, Environment and Temperature on Fatigue Crack Propagation in 2XXX Aluminium Alloys
- Analysis of Fatigue Damage Accumulation in TiAl Intermetallics
- Atomistic Model Analysis of Local and Global Instabilities in Crystals at Finite Temperature
- Stress Analysis of Highly Constrained Copper Strips with through Crack Shaped Voids Using Molecular Dynamics
- Dynamic Stability of Ni FCC Crystal under Isotropic Tension
- Structural Transformation in Nanowires CuAu I with Superstructure of L10 of Tetragonal Symmetry at Uni-Axial Tension Deformation
- Structural Response of Metal Crystallite with BCC Lattice on Atomic Level under Nanoindentation
- Comparison between Pile-Up Singularities and Stress Fields Induced by Thin Slip Bands. Application to the Prediction of Grain Boundary Microcrack Nucleation
- Planar Defects and Dislocations in C40 and FCC Lattices
- Thermally Activated Dislocation Motion in an AS21 Alloy and Alloy Reinforced with Short Ceramic Fibres Studied at Elevated Temperatures
- Deformation and Fracture of a Magnesium Alloy at Elevated Temperatures
- Thermodynamics of Dislocation Pattern Formation at the Mesoscale
- Modeling and Experimental Study of Long Term Creep Damage in Austenitic Stainless Steels
- 3D Discrete Dislocation Dynamics Applied to a Motion of Low-Angle Tilt Boundaries
- Lattice-Spring Modeling of Graphite Accounting for Pore Size Distribution
- Non-Planar Dislocations in MoSi2
- Deformation and Fracture of Hydrogenated GaSe and InSe Layered Crystals
- A Contribution to the Physical Interpretation of the Morphology of Fatigue Fracture Surfaces
- The Simulation of the Fatigue Fracture Process at Random Loading
- Numerical Life Estimation of Structure Components Subjected to Hydrogen Embrittlement and Cycling
- Mathematical Model of Fan-Head Shear Rupture Mechanism
- Jet Theory in Microstructures
- Thermodynamically Consistent Model of Damage in Laminated Rocks
- Micromechanics of Discontinuities and High Porosity Bands Formation in the Unconsolidated Sedimentary Rocks
- Micromechanical Modelling of Advanced Ceramics with Statistically Representative Synthetic Microstructures
- Mass-Velocity Correlation in Impact Fragmentation
- Modelling of Thermal Fracture of Functionally Graded/Homogeneous Bimaterial Structures under Thermo-Mechanical Loading
- Compression of Heterogeneous Material Systems Based on Wang Tilings
- Numerical Investigation on the Size Effect of a WC/Co 3D Representative Volume Element Based on the Homogenized Elasto-Plastic Response and Fracture Energy Dissipation
- Identification of Structural Parameters of Metal Fibre Concrete Using Magnetic Approach
- Dynamic Recrystallization of the Alloy Fe-40at.%Al-Zr-B
- Inaccuracy in Residual Stress Estimation and its Influence on the Residual Lifetime of Polymer Pipes
- Criterion for Crack Kinking out of the Interface of Two Orthotropic Layers Subjected to Thermal and Mechanical Loading
- The Experimental Study and Numerical Estimation of Fracture Toughness of Heterogeneous Welded Joints
- Critical Value for Crack Propagation from Sharp V-Notch
- Strength of an Elastic Plane with a Square Lattice of Circular Holes under External Loading
- Evaluation of Three-Point Bending Fracture Tests of Concrete Specimens with Polypropylene Fibres via Double-K Model
- Fracture-Micromechanics Based Model of Mortars Susceptible to Shrinkage
- Crack Growth Modelling in the Silicon Nitride Ceramics by Application of the Cohesive Zone Approach
- Temperature Field and Solidification Structure of a Ductile-Cast-Iron Roller
- The Use of Computer Simulation in the Electronic Packaging Process
- Numerical Simulation of Damage to Fracture Transition in Metals Based on the Statistical Model of Mesodefect Evolution
- Application of Multi-Parameter Fracture Mechanics to Study of Crack Propagation Angle in Selected Mixed-Mode Geometry
- Numerical Model of Plate from Hollow Core Panels with Contact - Target Pairs
- A Numerical Estimation of Fatigue Crack Tip Plastic Zone Size and Shape under Mixed-Mode Loading Condition
- Interrelation between Local and Global Characteristics of Cleavage Fracture
- An Experimental, Numerical and SEM Study of Fracture in a Thin Polymer Film
- Stochastic Fracture Simulations of Concrete Beams with Shallow Notches
- Contribution to the Life Prediction of Aluminium Alloys Parts under Isothermal Fatigue
- Damage Mechanics and Critical Plane Approach to Multiaxial Fatigue
- Modeling of Fatigue Crack Initiation in Wire-Bonds Using a Novel Approach of Strain Gradient Theory
- Crack Growth Tendency of Surface Shear Cracks in Rolling Sliding Contact
- Fatigue Crack Propagation in Steels for Railway Axles
- Calibration of Selected Ductile Fracture Criteria Using Two Types of Specimens
- Estimation of the Zone of Failure Extent in Quasi-Brittle Specimens with Different Crack-Tip Constraint Conditions from Stress Field
- Geometry Transferability of Lemaitre's Continuum Damage Mechanics Model in the Plane Stress Specimens
- Localized Plastic Flow Autowaves and the Hall-Petch Relation for Al
- On the Correlation of Fracture Quantities in Small Punch Test
- Influence of the Microstructure on the Fracture Behavior of Carbon Bonded Alumina
- Mixed Mode Interlaminar Fracture of Carbon Nanotubes Enhanced Epoxy/Glass Fiber Composites
- Features of Shock-Wave Processes and Fracture in Anisotropic Materials
- Failure Mechanisms of an AISI 4135 Steel Submitted to the Disk Pressure Test under Helium and Hydrogen Gas
- Measurement of Residual Stresses around the Notch of Tensile Specimens of the High-Cr Tempered Martensitic Steel F82H-Mod
- Strength Hierarchy for Nano-Sized Crystals
- Grain Refinement and Deformation Behaviour of Medium Carbon Steel Processed by ECAP
- Deformation Mechanisms in Ultrafine-Grained Zn at Different Strain Rates and Temperatures
- Interface Influence on Dispersion Dynamic of Metal Nanowires under Electric Pulse Loading
- Details of the Formation of Superstructures in the Process of Ordering in Cu-Pt Alloys
- Preparing of Silver Nanoparticles by Selective Dissolving of Aluminium Matrix
- Glass Surface Refining by Deposition of Nano-Particles
- Quantum-Mechanical Study of Single-Crystalline and Polycrystalline Elastic Properties of Mg-Substituted Calcite Crystals
- Porous Magnesium for Medical Applications - Influence of Powder Size on Mechanical Properties
- Fractographic Analysis of Surface and Failure Mechanisms of Nanotitanium after Laser Shock-Wave Treatment
- Multiscale Heterogeneity of Bone Microporosities and Tissue Scaffolds
- Analysis of Compressive Properties of Porcine Temporomandibular Joint Disc
- Experimental Studies of Elastic Properties of Dental Enamel and Photopolymer Used for early Caries Treatment
- Mathematical Modeling of Caries Initiation and Progression Occurring in Dental Enamel
- Evaluation of Developed Texture during Cold-Rolling Deformation of Ti-Nb-Ta-Zr Biocompatible Alloy
- Recrystallization Temperature Influence upon Structural Changes of 90% Cold Rolled Ti-29Nb-9Ta-10Zr Biocompatible Alloy
- The Impact of Graphite Source and the Synthesis Method on the Properties of Graphene Oxide
- Computational Modeling of Porous Ceramics with Bioactive Layer
- Local Mechanical Properties of Various Bone Cements
- Solute Interaction in Grain Boundary Segregation and Cohesion
- On the Micromechanisms of Fatigue Crack Propagation in Aluminum Cast Alloys
- High-Density Ceramic Materials on the Basis of Silicon Carbide
- Fibre-Matrix Interface Development during High Temperature Exposition of Long Fibre Reinforced SiOC Matrix
- Estimation of Apparent Fracture Toughness of Alumina Based Ceramic Laminate
- Siliconizing in a Fluidized Bed Reactor
- Microstructure-Based Life Prediction of Thermal Barrier Coatings
- Nanoindentation of Thin Copper Coatings
- Influence of Low Pressure Plasma Spraying Parameters on MCrAlY Bond Coat and its Microstructure
- Fatigue Response of Hybrid Ti/APC-2 Nanocomposite Laminates with Single-Edged Cracks
- Surface Relief Evolution in IN792-5A Nickel Superalloy under High Temperature Fatigue Straining with Hold Times
- The Changes of Fatigue Properties in Aluminium Cast Alloy during Solution Treatment
- Characteristics of Duplex Treated AISI 304 Stainless Steel
- Influence of Localized Structural Defects on the PN Junction Properties
- Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction
- Study of the Influence of Structural Defects on Properties of Silicon Solar Cells
- Investigation of the Mechanical Properties of Lead-Free Solder Materials
- Photo-Reflective Layer on Low Temperature Co-Fired Ceramic for Optical Applications
- Degradation of TBC Coating during Low-Cycle Fatigue Tests at High Temperature
- Assessment of the Unstressed Lattice Parameters for Residual Stresses Determination by Neutron Diffraction in Engineering Materials
- The Influence of Long-Term Heat Treatment on Microstructure of Zr-Modified Aluminide Coating Deposited by CVD Method on MAR M200+Hf Nickel Superalloy
- Thermal Analysis of Halide Activator Used in Aluminizing of TiAl Intermetallics
- The Effect of Long-Term Annealing on Microstructure of Aluminide Coatings Deposited on MAR M200 Superalloy by CVD Method
- Complex Metallic Alloys - Microstructure Characterization
- Kinetics of Deformation Processes in a High-Alloy Cast TWIP Steel Determined by Acoustic Emission and Scanning Electron Microscopy
- Microscopic Strain and Crystal Rotation Measurement within Metallurgical Grains
- Advanced Microstructure Studies of an Austenitic Material Using EBSD in Elevated Temperature In Situ Tensile Testing in SEM
- A Comparative Study on Infrared Thermography during Ultrasonic Fatigue Testing of Cast Steel 42CrMo4 and Cast Aluminium Alloy AlSi7Mg
- Quantification of Liver Microcirculation Using X-Ray Microtomography of Vascular Corrosion Casts
- Experimental Study of Defect Induced Temperature Evolution in Polycrystalline Metals
- Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloys
- Formation of Structurally Complex U-Phase in Al72Pd12.8Co15.2 Alloy
- Using Acoustic Emission in Fracture Monitoring of Cementitious Composites
- Influence of the Surface Treatment of Tubes on the Heat Transfer in Low Pressure Atmosphere
- Experimental Studies of Excess Noise Sources in Concrete Based Materials as a Limiting Factor for Electromagnetic Emission Measurement
- Mechanical Induced Defects and Fractures in the Silicon Solar Cell Structure
- Comparing the Properties of Polypropylene Fibers Contained in Ordinary and Lightweight Concrete Using Three-Point Bending Tests with Stress Concentrator and Acoustic Emission Method
- A FPGA-PC Based Acoustic Emission System with Logarithmic Preamplifier for Fracture Monitoring
- Monitoring of the Damage in Stone Blocks by Means of Non-Destructive Methods
- Detection of Inhomogeneities and Cracks in Composite Materials by the Method of Partial Discharges
- Study of Initial Stages of Fatigue Process Using Non-Destructive Testing Methods
- Microstructural Investigations of Nickel-Based Superalloys with Different Structure
- Advanced 3D Packaging of Chips and Materials Integrity: Stress-Induced Effects and Mechanical Properties of New Ultra Low-k Dielectrics for On-Chip Interconnect Stacks
- Fracture of Irradiated Austenitic Stainless Steel with Special Reference to Irradiation Assisted Stress Corrosion Cracking
- The Effect of Radiation-Induced Structural Changes under Accelerated Irradiation on the Behavior of Water-Cooled Reactor Pressure Vessel Steels
- Intergranular Embrittlement of Nuclear Reactor Pressure Vessel Steels
- Influence of Morphology of Deformation Induced #945;´-Martensite on Stress-Strain Response in a Two Phase Austenitic-Martensitic-Steel
- Microstructure-Related Scratch Resistance and Indentation Creep Behavior of PA6 and PA6 Nanocomposites
- Damage and Fracture Behaviours in Aged Austenitic Materials during High-Temperature Slow Strain Rate Testing
- Structural and Fatigue Properties of Titanium-Steel Bimetallic Composite Obtained by Explosive Welding Technology
- Structural Modifications of the Aluminium Alloy in Conditions of Additional Shock Impulse Load
- Influence of Cooling Rate on Final Properties of Laboratory Rolled Products
- Extrapolation of Sigmoidal Creep Curve by Strain Acceleration Parameter
- Determining Elastic-Plastic Properties of Al6061-T6 from Micro-Indentation Technique
- Production of Al Metal Matrix Composites by the Stir-Casting Method
- Elastic Properties of Porous Alumina, Zirconia and Composite Ceramics
- Standing Contact Fatigue Analyse of Steels with Different Microstructures
- High Temperature Fatigue Strength and Quantitative Metallography of an Eutectic Al-Si Alloy for Piston Application
- Effects of Different Microstructure on Resistance of EA4T Railway Axle Steel of Equal Strength to Fatigue Crack Growth
- Investigation of the Microstructure Factors Affecting the Brittle Fracture Initiation of Pre-Cracked Charpy-Type Samples of VVER-1000 RPV Steel
- Microstructure and Mechanical Properties of Rapidly Solidified Al-Fe-X Alloys
- Heat Treatment Effects on Static and Dynamic Mechanical Properties of Sintered SINT D30 Powder Metal
- Influence of the Composition of Cement Mortars Modified by Lime or Polymers on the Mechanical Properties and Microstructure of Mortars
- Influence of Fly Ash on Abrasion Resistance of Concretes with their Additions
- Relation between Microstructure and Tribological Properties of High Density Polyethylene Hybrid Composites Filled with Untreated Glass Spheres, Talc and Calcium Carbonate
- Influence of Heat Treatment on Crack Tip Opening Displacement and on Resistance of Crack Propagation of Alloyed Steel
- Autowave Features of Plastic Deformation by Ductile Fracture
- Effect of Adding Graphite Powder to a UP Polymer on Friction and Wear for Different Loads and Rubbing Speeds
- Mechanical Behavior of Steel-Chips-Reinforced Concrete
- Acoustic Emission from Quasi-Brittle Failure of Cementitious Composites - Experimental Measurements and Cohesive Crack Model Simulations
- Influence of Heat Treatment of High-Speed Steel on its Microstructure, Hardness and Fracture Toughness
- Fatigue Characteristic of Aluminium Alloy 2024 under Cyclic Bending with the Controlled Energy Parameter
- Microstructure and Defects Evaluation of Varistors by Ultrasonic Waves in Low Frequency Range
- Influence of the Titanium and its Alloys Microstructure on the Fatigue Crack Paths
- High-Temperature Elastic Properties of Ceramics in the System MgO-Al2O3-SiO2 Measured by Impulse Excitation
- Thermal Effects while Fatigue Cracking Growth under Bending
- Influence of the Microstructure near the Interface on the Fatigue Life of Explosively Welded (Carbon Steel)/Zr Clads
- Microstructural Aspects of Low Cycle Fatigue of Aged GX12CrMoVNbN9-1 Cast Steel
- Fatigue Fracture of Turbine Blades: Case Studies
- Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems
- Nanoindentation and Microstructural Study of Cu-Co Alloys after Severe Plastic Deformation
- Mechanical Aspects of Plastic Deformation of Nickel Based Superalloy
- Relations between Microstructure and Mechanical Properties in Laminated Ti-Intermetallic Composites Synthesized Using Ti and Al Foils
- Fatigue Cracking and Acoustic Emission Regularities in Metals: Crack Origination and Growth
- Deformation Behaviour of Asymmetrically Fatigue Cycled Metallic Materials
- An Effect of the First Non-Singular Term of the Williams Asymptotic Expansion to the Stability of the Bi-Material Orthotropic Notch
- Fatigue Crack Growth of Thin Wall Magnesium AZ91 Alloy Cast
- Short Crack Growth Behavior in Ferrite-Bainite Dual Phase Steels
- A Discrete Model for Diffusion-Induced Grain Boundary Deterioration
- Role of Microstructure on Fracture Behavior of T91 Steel in Presence of Liquid Sodium
- Transition from Straight to Fractal Cracks due to Projectile Penetration
- The Effect of Temperature on the Course of Refractory Castables Cracking
- Temporal and Spatial Evolution of Bursts in a Fiber Bundle Model of Creep Rupture
- PSBs and Non-Propagation of Small Surface and Interior Cracks in Polycrystalline Copper
- The True Shape of Persistent Slip Markings in Fatigued Metals
- Slip Activity of Persistent Slip Bands in early Stages of Fatigue Life of Austenitic 316L Steel
- Propagation of Fatigue Cracks in Notched Specimens of EN AW 7475-T761
- Trajectory and Crystallography of Crack Growth in Austenitic Steel after LCF Tests
- Experimental Investigation of Modes II and III Fatigue Crack Growth in Unalloyed Titanium
- Complex Evaluation of Fatigue Tests Results of Plain C30/37 and C45/55 Class Concrete Specimens
- Magnesium AZ91 Alloy Cast Mechanical Properties Measured by the Miniaturized Disc-Bend Test
- The Role of Second Phase Intermetallic Precipitates in Fatigue Fracture Mechanism for Aluminum Alloy AW 7075