Materials science, applied mechanics and advanced engineering research : selected, peer reviewed papers from the 2014 2nd International Conference on Applied Mechanics, Materials, and Manufacturing (AMMM 2014), December 8-9, 2014, Bangkok, Thailand /
Saved in:
| Meeting name: | International Conference on Applied Mechanics, Materials, and Manufacturing (2nd : 2014 : Bangkok, Thailand) |
|---|---|
| Imprint: | Pfaffikon, Switzerland : Trans Tech, [2015] |
| Description: | 1 online resource |
| Language: | English |
| Series: | Applied Mechanics and Materials ; Volume 751 Applied mechanics and materials ; v. 751. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11243313 |
Table of Contents:
- Characteristics and Properties of Reinforced Oil Palm Frond Fibers (OPFF) in Polyvinyl Alcohol (PVA) Composite for Tubular-Shaped Trays
- Effect of Heat Treatment on the Microstructure of Duplex Stainless Steel
- Verification of Linear Dependence of Plastic Zone Size on J-Integral for Mixed-Mode Loading
- Morphology and Mechanical Properties of Ternary Polymer Blends Containing Liquid Crystalline Ionomers with Different Ionic Group
- Influence of QPQ Salt Bath Composite Processing on Microstructure and Property of a Certain Type Aviation Piston Engine Ring
- The Effect of Humping Semi-Enclosed Cage Structure on Polymer Chains Characteristics of TSI-POSS/PU Hybrid Composites
- Production Process Optimization of Mongolian Iron Ore Pellets for Baogang Group
- Influence of Mongolian Iron Concentrate Proportion on Roasting Characteristics
- Mn2+ and Co2+ Removal from Dilute Solution Using Cysteine Grafted Cobalt/Manganese Imprinted Crosslinked Chitosan
- Oxidation Characteristics of Cr2O3-La2O3 and NiAl-La2O3 Coated on Ferritic Stainless Steel by Thermal Spray Method
- Experimental Comparative Study of Carbon Nanotubes Synthesized from CO and CH4 by Flame Pyrolysis Method
- A Primary Study of Torch Brazing Pure Aluminum with Al-Si-Ge-Zn Solders
- Influence of the Brazing Methods on the Interface Structure and Property of the Cu/Al Brazed Joint
- Study on Titanium Alloy/Stainless Steel Welding Methods
- Microstructure and Property of N5 Single Crystal Superalloy Joints Bonded by Transient Liquid Phase Diffusion Bonding
- Efficiency of Agricultural Wastes for the Removal of Gasoline from Water
- An Improving Method for Background Correction in Laser Induced Breakdown Spectroscopy
- A Numerical Approach on New Constitutive Model for Thixotropic Substances
- The Effect of Elastic Modulus Rate in Stress Controlled Tests on the Modified Jeffrey's Model for Structured Fluids
- Elastoplasticity 2D Problems: Numerical Applications of the Tikhonov Regularization Method
- Energy Release Rate of Delaminated Piezoelectric Shell Subjected to Electro-Thermo-Mechanical Loadings
- Input Data Determination for Large Strain Simulations
- Using Indentation Test to Evaluate the Properties of Metallic Material with Strain Aging
- Effect of Nanoparticle Additives on Journal Bearing Lubricated with Non-Newtonian Carreau Fluid
- Research on the Damage Identification of Weld Metal Cracking of Metal Structure Based on PVDF
- A Vibro Acoustic Method for Non Destructive Test of Composite Sandwich Structures
- Factors Affecting Thickness of Prosthetic Socket in Thermoforming Fabrication
- Study on the Fractal Dimension of Rock Fracture Surface after Different Temperatures
- Experimental Study on Critical Stress for Sediment Incipient Motionin Deep Channel of North Passage of Yangtze River Estuary
- Local Consumption of PV Power Based on the Optimized Scheduling of Electric Vehicles Charging
- Dynamic Buckling of Elastic Cylindrical Shells under Axial Step Load
- Research on the Dynamic Buckling of Composite Laminated Plates with One Edge Fixed and Three Edges Simply-Supported
- The Influence of First Order Shear Deformation on Dynamic Buckling of Composite Bar
- Considering the Friction Equilibrium of an Elastic Rod Constrained to a Cylinder
- Analysis of Vibration Testing for the Structure with Bolted Flange Joints
- Ballistic Impact Experiments and Numerical Modelling of Parts of Sandwich Armor
- Study on Overpressure Protection System of Air Contaminations for Mobile Medical Shelters
- Estimation of THIV for Car Crash against Attachable Roadside Barriers Made of the High Strength Steel
- Optimization of Heat Treatment of Castings
- FEM Analyses of the Radiation in Heating Forging Furnace
- Thermal Enhancement in Tubes with Dual Twisted Tapes
- Simulation of Turbulent Heat Transfer in a Tube Fitted with Twisted Tape Placed Separately from the Tube Walls
- Enhanced Heat Transfer in Square Duct Fitted Diagonally with Double-Sided V-Ribbed Tapes
- Power Flattening on Design Study of Small Long-Life Boiling Water Reactor (BWR) with Tight Lattice Thorium Nitride Fuel
- Unprotected Loss of Flow Accident in Small Long Life Gas Cooled Fast Reactor
- Preliminary Analysis of Unprotected Loss of Heat Sink in Small Long Life Gas Cooled Fast Reactor
- Simulation of Machining of AISI1045 Based on Thermodynamics
- The Design and Implementation of Food Cold Chain Monitoring System Based on ZigBee
- A Framework of RFID-Based Complex Event Processing System for Assembly Manufacturing
- Analysis of Computer-Aided Design Software Used in Home Textiles of Digital Design
- Design and Evaluation of Stamping Module to Pattern Alignment Marks for LED Post-Processing
- A Metadata-Based Simulation Resource Registration Method
- 3D Unsteady Convection-Diffusion-Reaction via GFEM Solver
- 3D Unsteady Convection Problems via LSFEM Solver
- Application of the Method of Galerkin to Non Linear Problem Stochastic Heat Conduction One-Dimensional
- Oscillation Criteria and Spectrum of Self-Adjoint even Order Two-Term Differential Operators