Light metals technology 2015 : selected, peer reviewed papers from the Seventh International Light Metals Technology Conference (LMT 2015), July 27-29, 2015, Port Elizabeth, South Africa /
Saved in:
| Meeting name: | International Light Metals Technology Conference (7th : 2015 : Port Elizabeth, South Africa) |
|---|---|
| Imprint: | Pfaffikon, Switzerland : Trans Tech Publications Ltd, [2015] |
| Description: | 1 online resource. |
| Language: | English |
| Series: | Materials science forum, 1662-9752 ; v. 828-829 Materials science forum ; v. 828-829. |
| Subject: | |
| Format: | E-Resource Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11249468 |
Table of Contents:
- Achievements in Magnesium Alloy Research
- Casting Development with a High Strength Aluminium Alloy
- Challenges and Solutions in the Development of Magnesium Sheet for Sustainable Vehicle Concepts
- Development of New Oxide Based Master Alloys and their Grain Refinement Potency in Aluminium Alloys
- Thermal Stability of Al-Si-Cu-Mg Cast Alloys Modified with Transition Metals Zr, V and Ti
- Twin-Roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiC
- Controlling the Formation of Iron-Bearing Intermetallics in Wrought Al Alloys by Melt Conditioned DC (MC-DC) Casting Technology
- Direct-Chill Casting of AA7449 Aerospace Alloy under Electromagnetic and Ultrasonic Combined Fields
- Effect of Al-5Ti-1B Grain Refiner Addition on the Formation of Intermetallic Compounds in Al-Mg-Si-Mn-Fe Alloys
- Effect of Solidified Structure on Hot Tearing in Al-Cu Alloy
- Form Accuracy of Optical Mould Inserts Made from Rapidly Solidified Aluminium Alloys
- Growth of Solidification Grain of Aluminum Alloy Near a Mold
- Influence of Supercooling on the Formation of Primary Phase during Solidification
- Magnesium Melt Protection
- Melt Refining Technology of Highly-Contaminated Magnesium Alloy Scraps via a Sequential Refining Process
- Microstructure and Texture Development during Melt Conditioned Twin Roll Casting and Downstream Processing in an AZ31 Magnesium Alloy
- Reducing Non Value Adding Aluminium Alloy in Production of Parts by High Pressure Die Casting Using High Temperature Die Manufacturing Material
- Segregation Characteristics of Rheo-High Pressure Die Cast Al-Alloy 2139 Plates
- Solidification and Interface Reaction of Titanium Alloys in the BaZrO3 Shell-Mould
- Ultrasonic Melt Processing: Achievements and Challenges
- Analysis of the Cold Compaction Behaviour of TiH2-316L Nanocomposite Powder Blend Using Compaction Models
- Deformation and Densification Study of Titanium Powder Compact during Powder Forging Using Gurson and Gurson-Tvergaard Criterion
- Determination of Optimum Process for Thermal Debinding and Sintering Using Taguchi Method
- Effect of Processing Parameters on the Properties of Metal Injection Moulded Titanium Dental Implants
- Fabrication of Iron-Base Shape Memory Alloy Fiber Reinforced Aluminum by Spark Plasma Sintering
- Kinetics of Titanium Metal Injection Moulding Feedstock Thermal Debinding
- Powder Metallurgical Synthesis of Biodegradable Mg-Hydroxyapatite Composites for Biomedical Applications
- Reinforcement of 2124 Al Alloy with Low Micron SiC and Nano Al2O3 via Solid-State Forming
- Contribution of Hydrogen Promoted Aluminium Partitioning to Tempered #945;#769; Martensite Embrittlement in Ti-6Al-4V
- Development of a Continuous Cooling Transformation Diagram for an Al-Zn-Mg Alloy Using Dilatometry
- Effect of Ageing Treatment on the Microstructure and Hardness of the Ti6Al4V Alloy
- Effect of Rolling Temperature on Annealing of aa1050 Aluminium Alloy
- Heat Treatment of Titanium-Aluminum-Compounds Made by Co-Extrusion of Asymmetric Compound Profiles
- Influence of Ageing Heat Treatment on Microstructure and Mechanical Properties of a Secondary Rheocast AlSi9Cu3(Fe) Alloy
- Influence of Quench Rate on the Artificial Ageing Response of an Al-8Si-0.4Mg Cast Alloy
- Optimization of the Solution Heat Treatment of Rheo-High Pressure Die Cast Al-Cu-Mg-Ag 2139 Alloy
- Phase Transformation Cycle #946;#8594; #945;#8242; + #945; + #945;"#8594; #946; in Ti6Al4V Alloy
- Static Recrystallization Characteristic of Low Temperature Rolled AZ31 Magnesium Alloy during Annealing
- The Effect of Natural Pre-Ageing on the Mechanical Properties of Rheo-High Pressure Die Cast Aluminium Alloy 2139
- Age-Hardening Response of Mg-Al-Sn Alloys
- Bending Collapse Behaviour of Polyurethane Foam-Filled Rectangular Magnesium Alloy AZ31B Tubes
- Diamond Insert Wear when Turning Rapidly Solidified Aluminium RSA 443 of High-Silicon Content
- Dry Sliding Wear Behavior of EB Surface-Alloyed and Dispersed AZ91 Magnesium Alloy under Mild Wear Conditions
- Effect of Zn and Zr Concentration and Extrusion Conditions on the Mechanical Properties of Lean ZK Alloys
- Fatigue Behaviour of Titanium Transition Structures for Advanced Carbon Fibre Reinforced Plastics (CFRP)-Aluminium Joints
- MagForge - Mechanical Behaviour of Forged AZ31B Extruded Magnesium in Monotonic Compression
- Mechanical Properties of Fibre Laser Welded AZ31B Sheets and their Dependence on the Spot-Size
- Residual Stress in SLM Ti6Al4V Alloy Specimens
- Twinning Assisted Crack Propagation of Magnesium-Rare Earth Casting and Wrought Alloys under Bending
- Development of Biodegradable Coating for Controlled Dissolution of a Magnesium Alloy as an Implant
- Pre-Treatment and Organic Coating of Al Free Mg Alloy for Controlling Degradation Rates
- PVD Hard Coatings for High Loaded Al Alloys - Potentials and Limitations
- Surface Microstructure Modification by Wire-Brushing and Annealing and its Effect on Tensile Ductility and Bendability of Mg Sheet
- Tribocorrosion Response of Laser Clad TiNiZrO2 Composite Coatings on Ti6Al4V
- Bio-Mechanical Compatibility Assessment of Titanium-Nickel Alloy Fabricated Using Cold Spray Process
- A Novel Process for Fabricating Aluminium Alloy Porous Structure for Possible Application in Antimicrobial Filtration
- Development of High Welding Speed in Friction Stir Welded 5182-H111, and the Resulting Influence on down Force
- Evolution of High Precision Manufacturing of Contact Lenses
- Fine Metallic Particle Emission when Milling Aluminium Alloys and Aluminium Metal Matrix Composites
- Laser Weldability of Different Al-Zn Alloys and its Improvement
- On the Development of Mg Sheets with Improved Formability by Applying Additional Shear Strain during Processing
- Role of Surface Reactivity in Processing and Performance of Magnesium Alloys
- Softening Behavior of Ti6Al4V Alloy during Hot Deformation
- Investigation of Primary Fe-Bearing Compounds in Secondary Aluminium Alloys by Differential Scanning Calorimetry
- A Comparative Study on the Sintering and Casting of a Blended Elemental Ti-6Al-4V Alloy
- Characterisation of Oxide Coatings Produced on Aluminium by PEO at Different Frequencies of Pulsed Current
- 3D X-Ray Inspection of a Radio Controlled Airplane Engine
- Determining a Flow Stress Model for High Temperature Deformation of Ti-6Al-4V
- Evaluating the Johanson Theory for Titanium Powder
- Molecular Dynamics Simulation of Ti and Ni Particles on Ti Substrate in the Cold Gas Dynamic Spray (CGDS) Process
- On the Solute Diffusion Length in the Interdependence Model: Dendritic versus Non-Dendritic Interface
- Simulation of Natural Aging in Al-Mg-Si Alloys
- Optical Monitoring and Numerical Simulation of Temperature Distribution at Selective Laser Melting of Ti6Al4V Alloy
- Automotive Light-Weighting Using Aluminium Metal Matrix Composites
- Investigations on Fire-Resistant Magnesium Alloys for Aerospace Applications
- Light Metals for the Functional Requirements of Developing World Lower Extremity Paediatric Prosthetics: A Review of Current Material & Technology Trends