Fracture and fatigue of materials and structures : selected, peer reviewed papers from the 15th Polish Conference on Fracture Mechanics and Fatigue, September 15-18, 2015, Kielce, Poland /
Saved in:
Meeting name: | Polish Conference on Fracture Mechanics and Fatigue (15th : 2015 : Kielce, Poland) |
---|---|
Imprint: | Pfaffikon : Trans Tech Publications, [2016] |
Description: | 1 online resource |
Language: | English |
Series: | Solid State Phenomena ; Volume 250 Diffusion and defect data. Pt. B, Solid state phenomena ; v. 250. |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/11407358 |
Table of Contents:
- The Use of a Power Law Function for Fatigue Life Estimation for Block Loads
- Fatigue Crack Growth in Specimens with Rectangular Section under Torsion and Bending with Torsion
- Simulation of Crack Growth in a Cell Containing an Inclusion Using Cohesive Elements
- Fracture Analysis of EN AW-6063 Aluminum Alloy Thin-Walled Welded Stairs
- Analysis of the State of Stress at the V-Hole Ended Notch for Mode II
- Investigations on Magnetoelectric Composites Based on Terfenol-D & PZT in an Alternating Magnetic Field Conditions
- Analysis of Ceramic Elements with Ring-Crack Defects in Lubricated Rolling Contact
- Mean Stress in Algorithms Estimating Fatigue Life of Selected Structural Materials
- Effect of Frictional-Mechanical Treatment of the Low Alloy Steels on Some Exploitation Properties in Sea Water Simulated Solution
- Failure of Steel Bridges due to Constraint Induced Fracture
- The Influence of Microstructural Defects on the Stress State of S235JR Steel under Plastic Deformation
- Equivalent Fatigue Zone in a Notched Elements Determined by Use of Non-Local Line Method with Weight Function
- Comparison of 15Mo3 Strain Curves Obtained for Strain-Controlled Cyclic Bending and Tension-Compression Tests
- Analysis of Hysteresis Loop on the Basis of Variable-Amplitude Loading
- Energy Based Approach Calculations of Machine Components Fatigue Life
- Accelerated Determination of the Fatigue Limit and the S-N Curve by Means of the Thermographic Method for C45 Steel
- Proposition of Low-Cycle Fatigue Test Termination Criterion Based on Specimen Temperature Change
- Strip Yield Model Applicability to Crack Growth Predictions for Various Types of Fatigue Loading
- Comparison of the Experimental Results of the Calculation for Various Models of the Energy Parameter
- Strain Energy Cumulation at Increased Temperatures
- True and Nominal Stress during Low Cycle Fatigue Tests of Metals
- Experimental and Numerical Modeling of the Phenomenon of Delamination Cracking in S235 Steel
- Determination of Strain and Stress Fields in Laser Welded Joints by Means of the Aramis Video System
- The Influence of Multiaxial Superimposed Static Mean Stress on High-Cycle Fatigue Life of Cu-ETP Copper
- Stress Intensity Factor Calculation by Smoothed Finite Element Method
- Fatigue Life of Welded Joints of High-Strength Structural Steel S960QL
- Evaluation of Fatigue Failure of S960QL Steel in the Conditions of Plastic Strain
- Fatigue Cracking of AA2519-Ti6Al4V Laminate Bonded by Explosion Welding
- Tests of Fracture Toughness of Laser-Welded Joints Made of Duplex 2205 Steel
- Verification of the Charpy Impact Test Capability to Determine the Constants of the Johnson-Cook Model
- Verification of FEM Modelling Capabilities Allowing for the Effects of Strain Rate
- Alternative Method for the Determination of a Full S-N Fatigue Profile
- Description of Fatigue Characteristics for Welded Joints in FITNET Procedures - Selected Issues
- Influence of Metal Foil on Interface Stress State in CFRP Laminate
- Verification of Methods Used for Fatigue Testing of Small Steel Specimens Taken from Existing Structures
- The Influence of the Grade of Materials and their State on the Thermo-Mechanical Behaviour of the Chosen Power Plant Components
- Numerical Simulation of Void Nucleation in S355 Steel
- Fatigue Testing of Titanium Alloy Ti6Al4V Used in Medical Devices
- Fracture Problem of the Valve of Piston Engine
- Experimental Fatigue Analysis of Compressor Blades with Preliminary Defects