Inadvertent containment spray due to personnel error.

Inadvertent containment spray due to personnel error.

Saved in:

Bibliographic Details
Imprint:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1981.
Description:	1 online resource (2 pages).
Language:	English
Series:	Information notice ; 81-10 Information notice ; 81-10.
Subject:	Nuclear reactors -- Containment. Nuclear power plants -- Piping -- Valves.
Format:	E-Resource U.S. Federal Government Document Book
URL for this record:	http://pi.lib.uchicago.edu/1001/cat/bib/12092239

Hidden Bibliographic Details
Other authors / contributors:	U.S. Nuclear Regulatory Commission. Office of Inspection and Enforcement, issuing body.
Notes:	"March 25, 1981." Description based on online resource; title from HTML title screen (NRC, viewed March 20, 2020).
GPO item no.:	1051-H-08 (online)
Govt.docs classification:	Y 3.N 88:56-2/81-10

Similar Items

Breach of containment integrity.
Published: (1979)

Primary containment isolation valve discrepancies.
Published: (1983)

Direction-dependent leak characteristics of containment purge valves.
Published: (1988)

Excessive nitrogen supply pressure actuates safety-relief valve operation to cause reactor depressurization.
Published: (1980)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Failure of swing check valve in the decay heat removal system at Davis-Besse Unit No. 1.
Published: (1980)

Susceptibility of containment sump recirculation gate valves to pressure locking.
Published: (1995)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Leaking fuel element causes false indication of steam dryer leakage in boiling-water reactor.
Published: (2003)

Failures to identify containment leakage due to inadequate local testing of BWR vacuum relief system valves.
Published: (1986)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Undetected modification of flow characteristics in the high pressure safety Injection system.
Published: (1993)

Uncontrolled leakage of reactor coolant outside containment.
Published: (1985)

Inadvertent isolation of containment spray systems.
Published: (1984)

Reduction of reactor coolant inventory because of misalignment of RHR valves.
Published: (1986)

Risk assessment of severe accident-induced steam generator tube rupture /
Published: (1998)

Inadvertent containment spray and reactor vessel draindown at Millstone Unit 1.
Published: (1994)

Main steam isolation valve closure logic.
Published: (1985)

Leaking shutdown cooling isolation valves at Cooper Nuclear Station.
Published: (1994)

Cracking of valves in the condensate return lines of a BWR emergency condensation system.
Published: (1992)

Failure of air check valves to seat.
Published: (1985)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

RHR valve misalignment causes degradation of ECCS in PWRS.
Published: (1987)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

inadequate main steam safety valve (MSSV) setpoints and performance issues associated with long MSSV inlet piping.
Published: (1997)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Check valve problems.
Published: (1982)

Consideration of the stem rejection load in calculation of required valve thrust.
Published: (1992)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Slow five percent scram insertion times caused by viton diaphragms in scram solenoid pilot valves.
Published: (1996)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Vacuum relief system for boiling water reactor Mark I and Mark II containments.
Published: (1985)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Unit startup with degraded high pressure safety injection system.
Published: (1986)

Main steam isolation valve guide rail failure at Waterford Unit 3.
Published: (1988)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Loss of high head safety injection.
Published: (1992)

Potential clogging of high pressure safety injection throttle valves during recirculation.
Published: (1996)