Full-duplex communications for future wireless networks /
Saved in:
Imprint: | Singapore : Springer Singapore Pte. Limited, 2020. |
---|---|
Description: | 1 online resource (323 p.) |
Language: | English |
Subject: | |
Format: | E-Resource Book |
URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/12605032 |
Table of Contents:
- Intro
- Preface
- Contents
- Part I Self-Interference Cancellation
- 1 Antennas and Radio Frequency Self-Interference Cancellation
- 1.1 Introduction
- 1.2 Radio Frequency-Domain Isolation Requirements
- 1.3 Antenna Based Isolation
- 1.3.1 Separate Transmit and Receive Antennas
- 1.3.2 Circulators
- 1.3.3 Propagation Domain Cancellation
- 1.3.4 Adaptive Propagation Domain Cancellation
- 1.4 Passive Feedforward Cancellation
- 1.4.1 Single Loop Cancellation
- 1.4.2 Multi-Loop Cancellation
- 1.5 Electrical Balance Duplexers
- 1.5.1 EBD Operation
- 1.5.1.1 Tx-Rx Isolation
- 1.5.2 Tx and Rx Insertion Loss
- 1.5.3 Balancing Limitations
- 1.6 Active Cancellation
- 1.6.1 Hardware Cost
- 1.6.2 Wideband Cancellation
- 1.6.3 Equaliser Function Calculation
- 1.7 Combining Antenna and RF Cancellation Techniques
- 1.8 Conclusions
- References
- 2 Antenna/RF Design and Analog Self-Interference Cancellation
- 2.1 Introduction
- 2.2 Requirements for a Full-Duplex System
- 2.3 Passive Analog Cancellation
- 2.4 Active Analog Cancellation
- 2.4.1 Adaptive RF Circuits
- 2.4.2 Micro Photonic Canceller
- 2.4.3 Auxiliary Transmit Chain
- 2.5 Numerical Analysis and Discussions
- 2.6 Conclusion
- References
- 3 Digital Self-Interference Cancellation for Low-Cost Full-Duplex Radio Devices
- 3.1 Introduction
- 3.1.1 Basic Full-Duplex Device Architecture
- 3.1.2 Related Work
- 3.2 Challenges in Digital Cancellation
- 3.2.1 I/Q Imbalance
- 3.2.2 Nonlinear Distortion
- 3.2.3 Analog-to-Digital Converter Quantization Noise
- 3.2.4 Transmitter Thermal Noise
- 3.2.5 Oscillator Phase Noise
- 3.3 Advanced Self-Interference Signal Models
- 3.3.1 Linear Signal Model
- 3.3.2 Nonlinear Signal Model
- 3.4 Parameter Estimation and Digital Self-Interference Cancellation
- 3.4.1 Block Least Squares-Based Estimation and Cancellation
- 3.4.2 Least Mean Squares-Based Adaptive Estimation and Cancellation
- 3.4.3 Computational Complexity of Digital Cancellation
- 3.4.3.1 Least Squares
- 3.4.3.2 Least Mean Squares
- 3.5 Measurement-Based Self-Interference Cancellation Performance Evaluation
- 3.5.1 Measured Self-Interference Cancellation Performance of a Generic Inband Full-Duplex Device
- 3.5.2 Measured Self-Interference Cancellation Performance of an Inband Full-Duplex Relay
- 3.6 Conclusions
- References
- 4 Filter Design for Self-Interference Cancellation
- 4.1 Motivation
- 4.2 System Model
- 4.2.1 Dynamic Range
- 4.2.1.1 Quantization Noise
- 4.2.2 Transmit Signal Noise
- 4.2.2.1 Error Vector Magnitude
- 4.2.3 Channel Estimation Error
- 4.2.4 Self-Interference Channel
- 4.2.5 Self-Interference Signal
- 4.2.6 Time-Domain Signal Model
- 4.3 Mitigation of Self-Interference
- 4.3.1 Frequency-Domain Cancellation
- 4.3.1.1 Non-Orthogonal Multicarrier Modulation
- 4.3.2 Spatial Suppression
- 4.3.3 Spatial Suppression and Frequency-Domain Cancellation