Potential effect of line-induced vibration on certain target rock solenoid-operated valves.

Potential effect of line-induced vibration on certain target rock solenoid-operated valves.

Saved in:

Bibliographic Details
Imprint:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1985.
Description:	1 online resource.
Language:	English
Series:	Information notice ; 85-47 Information notice ; 85-47.
Subject:	Nuclear power plants -- Piping -- Valves. Solenoids -- Testing. Pipelines -- Vibration.
Format:	E-Resource U.S. Federal Government Document Book
URL for this record:	http://pi.lib.uchicago.edu/1001/cat/bib/12679040

Hidden Bibliographic Details
Other authors / contributors:	U.S. Nuclear Regulatory Commission. Office of Inspection and Enforcement, issuing body.
Notes:	"June 18, 1985." Description based on online resource; title from HTML title screen (NRC, viewed Nov. 10, 2020).
GPO item no.:	1051-H-08 (online)
Govt.docs classification:	Y 3.N 88:56-2/85-47

Similar Items

Solenoid valve problems.
Published: (1988)

Possible sticking of ASCO solenoid valves.
Published: (1985)

Operating problems with solenoid operated valves at nuclear power plants.
Published: (1986)

Reduced service life of Automatic Switch Company (ASCO) solenoid valves with Buna-N material.
Published: (2003)

Potential deficiency in improperly rated field wiring to solenoid valves.
Published: (1984)

Results of the NRC-sponsored qualification methodology research test on ASCO solenoid valves.
Published: (1984)

Scram solenoid pilot valve (SSSPV) rebuild kit problems.
Published: (1986)

Leak of reactor water to reactor building caused by scram solenoid valve problem.
Published: (1985)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)

Vibration-induced valve failures.
Published: (1983)

Solenoid magnet design; the magnetic and mechanical aspects of resistive and superconducting systems
by: Montgomery, D. Bruce (Donald Bruce), 1933-
Published: (1969)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Potential misassembly problem with Automatic Switch Company (ASCO) solenoid valve model NP 8316.
Published: (1983)

Failure of main steam isolation valves as a result of sticking solenoid pilot valves.
Published: (1995)

Vibration-induced degradation of butterfly valves.
Published: (2005)

Slow five percent scram insertion times caused by viton diaphragms in scram solenoid pilot valves.
Published: (1996)

Malfunction of a pressurized code safety valve.
Published: (1993)

Inoperability of power-operated relief valves masked by downstream indications during testing.
Published: (1996)

A right angle ³He cryostat incorporating a high field superconducting solenoid /
by: Marshak, H.
Published: (1970)

Accuracy of motor-operated valve diagnostic equipment (responses to supplement 5 to Generic Letter 89-10).
Published: (1994)

Potential for surveillance testing to fail to detect an inoperable main steam isolation valve.
Published: (1994)

Accuracy of motor-operated valve diagnostic equipment manufactured by Liberty Technologies.
Published: (1993)

Results of validation testing of motor-operated valve diagnosis equipment.
Published: (1992)

Valves, fittings /
Published: (1960)

Potentially substandard valve replacement parts.
Published: (1988)

Setpoint testing of pressurizer safety valves with filled loop seals using hydraulic assist devices.
Published: (1988)

Check valve inservice testing program deficiencies.
Published: (1988)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Potential deficiency in motor-operated valve control circuits and annunciation.
Published: (1984)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Workshop on Gate Valve Pressure Locking and Thermal Binding, held at Marriott Hotel, New Orleans, LA, February 4, 1994 /
Published: (1995)

Check valve problems.
Published: (1982)

Motor-operated valve actuator thrust variations measured with a torque thrust cell and a strain gage.
Published: (1993)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Target rock two-stage SRV setpoint drift update.
Published: (1988)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Motor-operated valve performance issues.
Published: (1996)

A practical guide to piping and valves for the oil and gas industry /
by: Sotoodeh, Karan
Published: (2021)