Setpoint testing of pressurizer safety valves with filled loop seals using hydraulic assist devices.

Setpoint testing of pressurizer safety valves with filled loop seals using hydraulic assist devices.

Saved in:

Bibliographic Details
Imprint:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, 1988.
Description:	1 online resource.
Language:	English
Series:	Information notice ; no. 88-68 Information notice ; no. 88-68.
Subject:	Nuclear power plants -- Piping -- Valves -- Testing. Relief valves -- Testing.
Format:	E-Resource U.S. Federal Government Document Book
URL for this record:	http://pi.lib.uchicago.edu/1001/cat/bib/12695887

Hidden Bibliographic Details
Other authors / contributors:	U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation, issuing body.
Notes:	"August 22, 1988." Description based on online resource; title from HTML title page (NRC, viewed Jan. 27, 2021).
GPO item no.:	1051-H-08 (online)
Govt.docs classification:	Y 3.N 88:56-2/88-68

Similar Items

Malfunction of a pressurized code safety valve.
Published: (1993)

Inoperability of power-operated relief valves masked by downstream indications during testing.
Published: (1996)

Main steam safety valve setpoint variation as a result of thermal effects.
Published: (1996)

Inaccuracy of safety valve set pressure determinations using assist devices.
Published: (1994)

Target rock two-stage SRV setpoint drift update.
Published: (1988)

Problems with Copes-Vulcan pressurized power-operated relief valves.
Published: (1994)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Check valve inservice testing program deficiencies.
Published: (1988)

Accuracy of motor-operated valve diagnostic equipment (responses to supplement 5 to Generic Letter 89-10).
Published: (1994)

Pressurizer safety valve reliability.
Published: (1986)

inadequate main steam safety valve (MSSV) setpoints and performance issues associated with long MSSV inlet piping.
Published: (1997)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)

Results of validation testing of motor-operated valve diagnosis equipment.
Published: (1992)

Accuracy of motor-operated valve diagnostic equipment manufactured by Liberty Technologies.
Published: (1993)

Potential for surveillance testing to fail to detect an inoperable main steam isolation valve.
Published: (1994)

Excessive nitrogen supply pressure actuates safety-relief valve operation to cause reactor depressurization.
Published: (1980)

Inadequate surveillance and postmaintenance and postmodification system testing.
Published: (1985)

Unexpected opening of multiple safety relief valves.
Published: (1996)

Main steam safety valve test failures and ringed setting adjustments.
Published: (1986)

Inadequate testing to detect failures of safety-related pneumatic components or systems.
Published: (1986)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

A study of air-operated valves in U.S. nuclear power plants /
by: Rothberg, O. (Owen)
Published: (2000)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

RELAP5/MOD3 assessment for calculation of safety and relief valve discharge piping hydrodynamic loads /
by: Stubbe, E. J. (Elie J.)
Published: (1994)

Reliability of main steam safety valves.
Published: (1986)

Proceedings of the Symposium on Inservice Testing of Pumps and Valves : held at Hyatt Regency Hotel, Washington, DC, August 1-3, 1989 /
Published: (1991)

NRC inspections of programs being developed at nuclear power plants in response to Generic Letter 89-10.
Published: (1994)

Detached check valve disc not detected by use of acoustic and magnetic nonintrusive test techniques.
Published: (2000)

Failures of nut-locking devices in check-valves.
Published: (1993)

Pressure (safety valves).
Published: (2015)

Inadequate local leak rate testing.
Published: (1992)

Failures of main steam isolation valves.
Published: (1988)

Failure of safety/relief valves to open at a BWR.
Published: (1982)

Inadequate inservice testing of main steam isolation valves.
Published: (1985)

Failure of safety/relief valves to open at BWR--interim report.
Published: (1983)

Valves, fittings /
Published: (1960)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Assessment study of RELAP5/MOD2 cycle 36.04 based on pressurizer safety and relief valve tests /
by: Stubbe, E. J. (Elie J.)
Published: (1990)

Assessment study of RELAP5/MOD2 cycle 36.04 based on pressurizer safety and relief valve tests /
by: Stubbe, E. J. (Elie J.)
Published: (1990)

Guidelines for inservice testing at nuclear power plants : inservice testing of pumps and valves and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants, final report /
by: Bedi, Gurjendra S.
Published: (2013)