As a man liveth /

As a man liveth /

Saved in:

Bibliographic Details
Imprint:	Cleveland, Ohio : The Manufacturers, c1918.
Description:	31 p. : ill., plans ; 29 cm.
Language:	English
Subject:	Lathing Stucco Architecture, Domestic Architecture, Domestic. Lathing. Stucco.
Format:	Print Book
URL for this record:	http://pi.lib.uchicago.edu/1001/cat/bib/3319953

Hidden Bibliographic Details
Other authors / contributors:	Associated Metal Lath Manufacturers.

Similar Items

Der Stuch; Aufbau und Werdegang erlautert am Beispiel der Neuen Residenz Bamberg.
by: Vierl, Peter
Published: (1969)

The stucco house, a book for those about to build--owner, architect, builder.
Published: ()

Stucco investigations at the bureau of standards with recommendations for portland cement stucco construction.
Published: (1926)

Der Stuckdekor in Thüringen vom 16. bis zum 18. Jahrhundert.
by: Baier-Schröcke, Helga
Published: (1968)

Römische Stuckreliefs /
by: Mielsch, Harald
Published: (1975)

Lo stucco nell'arte italiana; reproduzioni in parte inedite di saggi dal periodo etrusco al neo-classico ...
by: Ferrari, Giulio, 1858-
Published: (1911)

Lo stucco nell'arte italiana; reproduzioni in parte inedite di saggi del periodo etrusco al neo-classico;
by: Ferrari, Giulio, 1858-
Published: (1910)

Lo stucco nell'età della maniera : cantieri, maestranze, modelli /
Published: (2023)

Stucchi italiani; maesri genovesi sec. XVI-XIX.
by: Morazzoni, Giuseppe
Published: (1950)

Stucco in India : from pre-Mohenjodaro times to the beginning of the Christian era /
by: Varma, K. M. (Kalidindi Mohana), 1920-
Published: (1983)

Sasanidischer Stuckdekor : ein Beitrag zum Reliefdekor aus Stuck in sasanidischer und frühislamischer Zeit nach den Ausgrabungen von 1928/9 und 1931/2 in der sasanidischen Metropole Ktesiphon (Iraq) und unter besonderer Berücksichtigung der Stuckfunde vom Taht-i Sulaimān (Iran), aus Niẓāmbābād (Iran) sowie zahlreicher anderer Fundorte /
by: Kröger, Jens
Published: (1982)

Stucco from Chal Tarkhan-Eshqabad near Rayy /
by: Thompson, Deborah
Published: (1976)

Stucco-Decorationen aus Schloss Leopoldskron bei Salzburg. Ein Meisterwerk der Ornamentik aus der ersten Hälfte des XVIII. Jahrhunderts.
by: Forster, J
Published: (1897)

Stucco-Decorationen in dem reg. Chorherrnstifte Klosterneuburg bei Wien /
by: Ilg, Albert, 1847-1896
Published: (1896)

E de tsuzuru nurikabe ga umareta fūkei : sakan shigoto no fōkuroa /
by: Kobayashi, Sumio, 1943-, et al.
Published: (2018)

Stucco and decorative plasterwork in Europe /
by: Beard, Geoffrey, 1929-
Published: (1983)

Turning lathes : a manual for technical schools and apprentices. A guide to turning, screw-cutting, metal-spinning, &c. With 194 illustrations /
by: Lukin, James, 1828-
Published: (1888)

Metal turning : a book for engineering apprentices and students /
by: Horner, Joseph Gregory, 1847-1927
Published: (1924)

The wood turner's handybook. A practical manual for workers at the lathe, embracing information on the tools, appliances, and processes employed in wood turning,
by: Hasluck, Paul N. (Paul Nooncree), 1854-1931
Published: (1992)

Practical metal turning; a handbook for engineers, technical students, and amateurs (re-issue of "Engineers' turning") Illustrated by four hundred and eighty-five illustrations.
by: Horner, Joseph Gregory, 1847-1927
Published: (1906)

Simple decorative lathe work : a practical handbook on the construction and use of the ordinary turning lathe for the purpose of the above art /
by: Lukin, James, 1828-
Published: (1992)

Petit guide de l'ajusteur-toutneur et du mécanicien : à l'usage des élèves des écoles pratiques d'industrie et des candidats aux écoles nationales d'arts et métiers /
by: Liégeart, A.
Published: (1992)

Lathe work for beginners; a practical treatise on lathe work with complete instructions for properly using the various tools, including complete directions for wood and metal turning, screw cutting, measuring tools, wood turning, metal spinning, etc., and instructions for building home-made lathes with their attachments, etc.,
by: Yates, Raymond F. (Raymond Francis), 1895-
Published: (1922)

Der Stuck- und Estrichgips.
by: Rohland, Paul Waldemar, 1866-
Published: (1904)

Studien über Stuckgips, totgebrannten und Estrichgips.
by: Glasenapp, Maximilian von, 1845-1923
Published: (1908)

Practical metal turning for engineers,
by: Horner, Joseph Gregory, 1847-1927
Published: (1937)

Metal turning.
by: Horner, Joseph Gregory, 1847-1927
Published: (1891)

Modern tooling methods for turret lathes; practical information and suggestions for the correct handling of turret lathe tool equipment for both large and small lot production,
by: Lange, Max Ernst, 1888-
Published: (1926)

Die Dreherei und ihre Werkzeuge in der neuzeitlichen Betriebsführung ...
by: Hippler, Willy
Published: (1919)

Handbuch der Drechslerei /
by: Walde, Chr. Hermann
Published: (1992)

Handbuch der Dreherei : praktischer Selbstunterricht im Berechnen der Wechsel-Räder zum Gewinde-Schneiden und zur Gewindefabrikation, sowie zum Drehen, Bohren und Hobeln konischer Arbeiten auf der Drehbank sowie auf der Hobelmaschine : Konstruieren, Berechnen und Drehen von Schnecken, Zahnrädern, Spiralen, Winkeln, Kreislöchern, Vier- und Sechskant, Rädern, Faulenzern, Arbeitzeit, Riemen, Touren, Kreis, Radius, Durchmesser, Peripherie, Geschwindigkeiten, Modulgewinde, Fräsern, Uebertragungen, Schnitt-Geschwindigkeit, Pferdekraft, Ausdehnung, Erkalten, Gewichte und Münzen, etc. /
by: Loss, Aug. (Auguste)
Published: (1992)

Stucco reliefs of the first and second centuries still extant in Rome /
by: Cleland, Emily Wadsworth, 1892-
Published: (1924)

Un complesso di stucchi Romani provenienti da portici /
by: Pannuti, Ulrico
Published: (1978)

Lathe design, construction and operation, with practical examples of the lathe work; a complete practical work on the lathe. Giving its origin and development. Its design. Its various types as manufactured by different builders, etc.
by: Perrigo, Charles Oscar Eugene, 1848-
Published: (1916)

Modern American lathe practice; a new complete and practical work on the "king of machine shop tools," the American lathe. Giving its origin and development. Its design. Its various types as manufactured by different builders...etc.
by: Perrigo, Charles Oscar Eugene, 1848-
Published: (1907)

Concrete and stucco houses : the use of plastic materials in the building of country and suburban houses in a manner to insure the qualities of fitness, durability and beauty /
by: Hering, Oswald C. (Oswald Constantin), b. 1874
Published: (1912)

Mortars, plasters, stuccos, artificial marbles, concretes, Portland cements and compositions...
by: Hodgson, Fred. T. (Frederick Thomas), 1836-1919
Published: (1991)

Le ricette del restauro : malte, intonaci, stucchi dal 15. al 19. secolo /
by: Arcolao, Carla
Published: (1998)

Turning lathes : a manual for technical schools and apprentices /
by: Lukin, James
Published: (1899)

Turning lathes : a manual for technical schools and apprentices /
by: Lukin, James
Published: (2014)