Die Dreherei und ihre Werkzeuge in der neuzeitlichen Betriebsführung ...

Die Dreherei und ihre Werkzeuge in der neuzeitlichen Betriebsführung ...

Saved in:

Bibliographic Details
Author / Creator:	Hippler, Willy.
Edition:	2., erweiterte Aufl. ...
Imprint:	Berlin, Springer, 1919.
Description:	xi, 330 p. illus., diagrs. 24 cm.
Language:	German
Subject:	Turning (Lathe work) Lathes Lathes. Turning (Lathe work)
Format:	Print Book
URL for this record:	http://pi.lib.uchicago.edu/1001/cat/bib/3890432

Hidden Bibliographic Details
Notes:	committed to retain 20170930 20421213 HathiTrust

Similar Items

Handbuch der Dreherei : praktischer Selbstunterricht im Berechnen der Wechsel-Räder zum Gewinde-Schneiden und zur Gewindefabrikation, sowie zum Drehen, Bohren und Hobeln konischer Arbeiten auf der Drehbank sowie auf der Hobelmaschine : Konstruieren, Berechnen und Drehen von Schnecken, Zahnrädern, Spiralen, Winkeln, Kreislöchern, Vier- und Sechskant, Rädern, Faulenzern, Arbeitzeit, Riemen, Touren, Kreis, Radius, Durchmesser, Peripherie, Geschwindigkeiten, Modulgewinde, Fräsern, Uebertragungen, Schnitt-Geschwindigkeit, Pferdekraft, Ausdehnung, Erkalten, Gewichte und Münzen, etc. /
by: Loss, Aug. (Auguste)
Published: (1992)

Practical metal turning; a handbook for engineers, technical students, and amateurs (re-issue of "Engineers' turning") Illustrated by four hundred and eighty-five illustrations.
by: Horner, Joseph Gregory, 1847-1927
Published: (1906)

Practical metal turning for engineers,
by: Horner, Joseph Gregory, 1847-1927
Published: (1937)

Metal turning : a book for engineering apprentices and students /
by: Horner, Joseph Gregory, 1847-1927
Published: (1924)

Metal turning.
by: Horner, Joseph Gregory, 1847-1927
Published: (1891)

Turning lathes : a manual for technical schools and apprentices. A guide to turning, screw-cutting, metal-spinning, &c. With 194 illustrations /
by: Lukin, James, 1828-
Published: (1888)

Lathe work for beginners; a practical treatise on lathe work with complete instructions for properly using the various tools, including complete directions for wood and metal turning, screw cutting, measuring tools, wood turning, metal spinning, etc., and instructions for building home-made lathes with their attachments, etc.,
by: Yates, Raymond F. (Raymond Francis), 1895-
Published: (1922)

Modern tooling methods for turret lathes; practical information and suggestions for the correct handling of turret lathe tool equipment for both large and small lot production,
by: Lange, Max Ernst, 1888-
Published: (1926)

A treatise on lathes and turning : simple, mechanical, and ornamental /
by: Northcott, W. Henry (William Henry), 1846-
Published: (1868)

Handbuch der Drechslerei /
by: Walde, Chr. Hermann
Published: (1992)

The wood turner's handybook. A practical manual for workers at the lathe, embracing information on the tools, appliances, and processes employed in wood turning,
by: Hasluck, Paul N. (Paul Nooncree), 1854-1931
Published: (1992)

Simple decorative lathe work : a practical handbook on the construction and use of the ordinary turning lathe for the purpose of the above art /
by: Lukin, James, 1828-
Published: (1992)

Petit guide de l'ajusteur-toutneur et du mécanicien : à l'usage des élèves des écoles pratiques d'industrie et des candidats aux écoles nationales d'arts et métiers /
by: Liégeart, A.
Published: (1992)

Turning and boring tapers,
by: Colvin, Fred Herbert, 1887-
Published: (1902)

Threads and thread cutting
by: Colvin, Fred Herbert, 1867-
Published: (1903)

Spanabhebende werkzeuge für die metallbearbeitung und ihre hilfseinrichtungen,
by: Reindl, Josef, 1873-
Published: (1925)

Running an engine lathe; practical suggestions which will give the young machinist or apprentice the foundation principles of engine lathe work,
by: Colvin, Fred Herbert, 1887-
Published: (1941)

Specimens in eccentric circular turning : with practical instructions for producing corresponding pieces in that art /
by: Ibbetson, John Holt
Published: (1800)

Der Drechsler : ein Handbuch für Werkstatt und Schule /
by: Martin, E. A.
Published: (1992)

An introduction to eccentric spiral turning; or, New uses for old chucks.
by: Robinson, H. C.
Published: (1906)

Wood-turning.
by: Fairham, William
Published: (1992)

The art of polychromatic & decorative turning; a practical manual for the professional and amateur turner.
by: Audsley, George Ashdown, 1838-1925
Published: (1911)

Manuel du tourneur : ouvrage dans lequel on enseigne aux àmateurs la manière d'exécuter sur le tour a pointes ... précédé de notions élémentaires sur la connoissance des bois, la menuiserie, la forge, la trempe, la fonte des métaux, et autres arts qui se lient avec celui du tour /
by: Bergeron, L.-E., 1737-1805
Published: (1816)

Manuel du tourneur,
by: Bergeron, L.-E., 1737-1805
Published: (1816)

Wood-turning.
by: Fairham, William
Published: (1921)

Wood turning, prepared for the use of students in manual training high schools, technical schools and colleges,
by: Ross, George Alexander
Published: (1909)

The art of polychromatic & decorative turning; a practical manual for the professional and amateur turner.
by: Audsley, George Ashdown, 1838-1925
Published: (1992)

Ornamental turning; a work of practical instruction in the above art,
by: Evans, J. H. (John Henry)
Published: (1992)

Possibilities of small lathes; including particulars and details of making an inexpensive overhead, and other useful acessories for, and notes on, the choice of a lathe.
by: Lukin, James, 1828-
Published: (1992)

Manuel du tourneur : ouvrage dans lequel on enseigne aux amateurs la manière d'exécuter sur le tour à pointes, à lunette, en l'air, excentrique, ovale, à guillocher, quarré, à portraits & autres, tour ce que l'art a produit de plus ingénieux & de plus agréable /
by: Bergeron, L.-E., 1737-1805
Published: (1792)

A bibliography of the art of turning and lathe and machine tool history, with additional references to books and periodical articles which are of interest in relation to these subjects.
by: Abell, Sydney George
Published: (1956)

A manual of the hand lathe: comprising concise directions for working metals of all kinds, ivory, bone and precious woods; dyeing, coloring, and French polishing; inlaying by veneers, and various methods practiced to produce elaborate work with dispatch, and at small expense.
by: Watson, Egbert P. (Egbert Pomeroy)
Published: (1869)

A manual of the hand lathe : comprising concise directions for working metals of all kinds, ivory, bone and precious woods; dyeing, coloring, and French polishing, inlaying by veneers, and various methods practiced to produce elaborate work with dispatch, and at small expense /
by: Watson, Egbert P. (Egbert Pomeroy)
Published: (1991)

Neuere Werkzeugmaschinen für die Metallbearbeitung. Drehbänke sowie Maschinen zum Drehen, Bohren und Gewindeschneiden. Ein Handbuch für Maschinenbauer, Gewerbtreibende, Techniker und Studierende.
by: Pregel, Th
Published: (1898)

A course in wood turning /
by: Milton, Archie Seldon, 1887-
Published: (1919)

Specimens in eccentric circular turning : with practical instructions for producing corresponding pieces in that art /
by: Ibbetson, John Holt
Published: (1817)

Wood-turning, wood-working machines and pattern making; a text for university, college and technical high school shops and for apprenticeship courses,
by: Resides, George H. (George Henry), 1877-
Published: (1992)

Turning and boring; a specialized treatise for machinists, students in industrial and engineering schools, and apprentices, on turning and boring methods, including modern practice with engine lathes, turret lathes, vertical and horizontal boring machines,
by: Jones, Franklin Day, 1879-1967
Published: (1914)

Die Rohstoffe des Tischler-u. Drechslergewerbes /
by: Moeller, Josef, 1848-1924
Published: (1993)

Formazione del truciolo metallien.
by: Isnardi, Filippo Alberto
Published: (1955)