Safety injection system weld flaw at Sequoyah Nuclear Power Plant, Unit 2.

Safety injection system weld flaw at Sequoyah Nuclear Power Plant, Unit 2.

Saved in:

Bibliographic Details
Imprint:	Washington, DC : U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, [1997]
Description:	1 online resource.
Language:	English
Series:	NRC information notice ; 97-19 NRC information notice ; 97-19.
Subject:	Sequoyah Nuclear Plant. Sequoyah Nuclear Plant. Nuclear power plants -- Piping -- Valves -- Welding -- United States. United States.
Format:	E-Resource U.S. Federal Government Document Book
URL for this record:	http://pi.lib.uchicago.edu/1001/cat/bib/8268288

Hidden Bibliographic Details
Other authors / contributors:	U.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation.
Notes:	Title from HTML title screen (viewed on Nov.10, 2010). "April 18, 1997."
GPO item no.:	1051-H-08 (online)
Govt.docs classification:	Y 3.N 88:56-2/97-19

Similar Items

Safety evaluation report related to the license renewal of Sequoyah Nuclear Plant Units 1 and 2 : Docket numbers 50-327 and 50-328.
Published: (2015)

Safety evaluation report related to the license renewal of Sequoyah Nuclear Plant Units 1 and 2 : Docket numbers 50-327 and 50-328.
Published: (2015)

Generic environmental impact statement for license renewal of nuclear plants. Supplement 53, Regarding Sequoyah nuclear plant, Units 1 and 2. Final report.
Published: (2015)

Generic environmental impact statement for license renewal of nuclear plants : supplement 53, regarding Sequoyah nuclear plant, units 1 and 2 : draft report for comment.
Published: (2014)

State-of-the-art-reactor consequence analysis (SOARCA) project : Sequoyah integrated deterministic and uncertainty analyses /
Published: (2019)

Guidelines for inservice testing at nuclear power plants : inservice testing of pumps and valves and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants : draft report for comment /
by: Bedi, Gurjendra S.
Published: (2011)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Statue of Sequoyah. Proceedings in Statuary Hall of the United States Capitol upon the unvailing and presentation of the statue of Sequoyah by the state of Oklahoma.
Published: (1924)

Guidelines for inservice testing at nuclear power plants : inservice testing of pumps and valves and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants, final report /
by: Bedi, Gurjendra S.
Published: (2013)

NRC inspections of programs being developed at nuclear power plants in response to Generic Letter 89-10.
Published: (1994)

inadequate main steam safety valve (MSSV) setpoints and performance issues associated with long MSSV inlet piping.
Published: (1997)

Fabrication flaw density and distribution in repairs to reactor pressure vessel and piping welds /
by: Schuster, G. J.
Published: (2008)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Westinghouse motor-operated valve performance data supplied to nuclear power plant licensees.
Published: (1992)

Cross-tied safety injection accumulators.
Published: (1996)

Undetected modification of flow characteristics in the high pressure safety Injection system.
Published: (1993)

A study of air-operated valves in U.S. nuclear power plants /
by: Rothberg, O. (Owen)
Published: (2000)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Failure of air check valves to seat.
Published: (1985)

Check valve problems.
Published: (1982)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Consideration of the stem rejection load in calculation of required valve thrust.
Published: (1992)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Slow five percent scram insertion times caused by viton diaphragms in scram solenoid pilot valves.
Published: (1996)

Response of a 6-inch nuclear power plant valve to dynamic excitation /
by: Masri, S. F.
Published: (1980)

Sequoyah
by: Foreman, Grant, 1869-1953
Published: (1938)

Malfunction of a pressurized code safety valve.
Published: (1993)

Guidelines for inservice testing at nuclear power plants
by: Campbell, P.
Published: (1995)

Main steam safety valve failures caused by failed cotter pins.
Published: (1984)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.
Published: (1985)

Operating problems with solenoid operated valves at nuclear power plants.
Published: (1986)

Inadequate surveillance and postmaintenance and postmodification system testing.
Published: (1985)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Apparent improper modification of a component affecting plant safety.
Published: (1983)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Potential clogging of high pressure safety injection throttle valves during recirculation.
Published: (1996)