Progress in manufacturing automation technologies : special topic volume with invited peer reviewed papers only /
Saved in:
| Imprint: | Durnten-Zurich, Switzerland ; Enfield, NH : Trans Tech Publications, c2011. |
|---|---|
| Description: | xi, 453 p. : ill. ; 25 cm. |
| Language: | English |
| Series: | Advanced materials research, 1022-6680 ; v. 305 Advanced materials research ; v. 305. |
| Subject: | |
| Format: | Print Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/8684062 |
Table of Contents:
- Research of Dynamic Temperature Field of Spur Gear Based on ANSYS
- Research on Hardware-in-the-Loop Missile Weapon System Simulation Based on HLA and Modelica
- Study on Nonlinear Vibration in Dynamic Turning Long-Thin Axis Process
- Modal Analysis on Fluid-Structure Interaction System of a Large-Scale Gas Control Valve
- High-Precision Positioning and Speed Smooth Transition Control Algorithm for Terminal Point of Micro-Line Segment
- Study on High Speed Cutting Technology for Green Manufacturing
- The Image Process Technology of Micro-Detection for Jet-Pan Based on CCD
- Design Consideration for Precise Cable Drive
- Research Progress of Green Manufacturing and its Uncertainty Analysis
- Influences of Cutting Edge Radius on Cutting Deformation in High-Speed Machining Ti6Al4V
- Non-Contact Vision Inspection System of Geometric Dimension Based on LabVIEW and IMAQ Vision
- Function Simulation Analysis for Conical Spring of DANA Axis-Fixed Transmission
- Visual Detection Model of Gauge between High Signals and Contact Net
- A Novel Small Mobile Robot System for Polishing Freeform Surface of Large Mold
- Gross Error Detection in Pneumatic Measurement of Form Tolerance Based on Fuzzy Assessment
- Hierarchical Structure Model of High Speed Milling Hardened Steel
- A Multi-Objective Coordinated Control Oriented New Algorithm for NURBS Curve Interpolation
- Principle Experiment of Electroactive Polymer Wind-Driven Generator
- A Study into Spin-Forming Process of Internal Spline
- A Fractal Model of the Semi-Fixed Abrasive Plate Surface Topography
- Number Study of the Formation Process of Shaped Charge Metal Jet for Quarry Mining
- Numerical Simulation for the Interaction of the Semi-Fixed Abrasive Plate with the Workpiece
- Kinematics Analysis of the Greenhouse Robot
- Designing of Armature Components' Composite Stiffness Measuring Device Structure
- Static and Dynamic Characteristic of Cutting Force when High-Efficiency Cutting Ti-6Al-4V
- Cutting Parameters Optimization of Turning Titanium Alloy Diaphragm Disk Based on Surface Topography Simulation
- What are Virtual Enterprises Virtualize
- Quantitative Analysis of Primary Phase Morphology in Semi-Solid Alloys Based on LabVIEW and IMAQ Vision
- Finite Element Modeling of Polymer Flow during Hot Embossing with Different Mold Structures and Embossing Conditions
- Design of Interface Circuit of CPLD-Based Photoelectric Encoder
- Monte Carlo Simulation and Applications in Design and Manufacture of Nanostructures
- The Formation of Virtual Enterprise: A Resource Based Perspective
- Study on Urban Expressway Lane Mark Detection in Special Conditions
- Influence of Shear and Gyroscopic Effect of Grinder Spindle on Critical Speed
- Study on Control of Brushless DC Motor for Electric Vehicle
- Design Method of Turbine Fir-Tree Blade Root Tenon Slot Broach
- The Characteristics of the Fatigue Failure in the Disposable Machinery
- Study on Uniform Magnrtorheological Finishing Technology with Changeable Removal Rate Model Based on Rheological Effect
- Dynamics Characteristic Analysis of Deliberate Mistuned Bladed-Disk System in Compressor Based on CMS Mothod
- Experiment Study of Adiabatic Shear Critical Conditions in Orthogonal Cutting of Fe-36Ni Invar Alloy
- Research on High Efficient Virtual Measuring Method for Globoidal Cam Machining Error
- Fatigue Source Analysis of Dynamic Mold Temperature Injection Mold for Large Plastic Parts
- Design of Blocking Software Based on DSPF2812 Servo Control System
- Mechanical Behavior of the Amorphous/Nanocrystal Ni-Mo Alloy
- Surface Morphology Simulation of High Speed Milled of Face Milling Cutters
- A New Control Algorithm for Maximum Power Point Tracking of Photovoltaic Generation System
- Simulation Analysis of Fluid-Structure Interactions with Moving Mesh
- Research on CAD Data Format Conversion for Transport Infrastructure Information
- Research on the Fault Diagnosis Knowledge Representation and Application Method Based on Ontology
- Concentration Polarization BP Model of Nanofiltration Separation
- Based on LS-DYNA Dynamic Simulation Analysis in Electroplated CBN Hard Gear-Honing Processing
- The Research Trends and Comprehensive Evaluation of Hybrid Excavator
- Study on Desalination Characteristics of Nanofiltration Separation
- Temperature Field Measurement of Turning Tool with Thermal Infrared Imager
- Study on Automatic Production Line for Coating Shell Making of Refined Casting Mould
- Three Dimensional Modeling and Aerodynamic Analysis of MW Wind Turbine Blade
- Study on Safe Behavior of Electric Bicycle Braking Process
- Development of Software System for NC Dressing Form Grinding Wheel
- Simulation of Tracking the Fluid-Fluid Interface with the Level Set Method
- Monte Carlo Simulation of Morphology Evolution of Machined Surface
- Design and FEM Analysis for Crankshaft in Truck Mounted Petroleum Compressor
- The Design and Simulation of Gear-Shaped Profile Chamfering Structure
- Research on Man-Machine Coordinated Manufacturing Mode Based on Wireless Communication and Internet of Things
- Study on Rainwater Fast Drain-Collection System in Campus Main-Road
- Research on the Condom Image Detection Algorithm for Automatic Sorting
- The Parameter Design and Experiment of Active Valve with Piezoelectric Pump
- A Wireless Temperature Measuring System for Rotating Spindle Based on ZigBee
- Dynamical Research on a Micro-Displacement Actuator Based on V-Type Guide-Way
- The Application of Fuzzy PID on Hydraulic Universal Testing Machine
- Study on Steady-State Temperature Field and Thermal Deformation for Permanent Magnet Synchronous Motorized Spindle
- Shear and Squeeze Rheometry of Magnetorheological Fluids
- The Influence of Multiple Piezoelectric Effects on Elastic Coefficient of Piezoelectric Ceramics
- Research on Modeling Mapping Relationship between Cutting Load and Spindle Motor Current
- Optimization of Axis Tilt Machining with Five-Axis Ball-End Cutter
- A Minimum Cost and Maximum Flow Model of Hazardous Materials Transportation
- Microstructure and Electrochemical Properties of Amorphous/Nanocrystal Ni-Mo Deposits
- A Fast Linear Calibration of Computer Stereo Vision System
- Microstructure and Electrochemical Properties of Foamed Ni-Mo Alloy by Pulse-Electrodeposition
- An Operation Job Time Dispatching Algorithm for Injection Mold Manufacturing
- Improvement on the Anycast Routing Algorithm Based on Genetic Algorithm
- Control Research on Construction Excitation Frequency of Resonant Rubblization Machine
- Laboratory Properties Evaluation of Wearing Course Asphalt Mixtures Incorporating RAP Materials
- Study on Processing Technology of Waste Tire Crumb Rubber Modified Asphalt
- Finite Elements Simulation Analysis and Research on the Mast of Rotary Drilling Rig
- A Research Based on the Deep Self-Balanced Hydraulic Pump
- Theoretical Calculation and Experimental Research on Sequential Turbocharging of a Marine Diesel Engine
- Analysis Geometric Precision of Workpiece and Geometric Errors Model of 5-Axis Machining Center for Processing Turbo Molecular Pump Rotor
- Study on Modal Parameters Identification Based on Stratified Sampling and Complex Morlet Wavelet Transform
- Design and Implementation of Engineering Graphics Computer Practice and Examination System that Based on Visual Basic
- Technique Project and Experimental Study of Gas-Particle Two-Phase Compulsive Circulation Flows Finishing
- Topology Optimization of Headstock of Heavy Machine Tool
