Aluminum : properties and physical metallurgy /
Saved in:
| Imprint: | Metals Park, Ohio : American Society for Metals, c1984. |
|---|---|
| Description: | 424 p. : ill. ; 24 cm. |
| Language: | English |
| Subject: | |
| Format: | Print Book |
| URL for this record: | http://pi.lib.uchicago.edu/1001/cat/bib/775939 |
Table of Contents:
- Chapter 1.. Properties of Pure Aluminum
- Mechanical Properties
- Tensile and Yield Properties
- Stress-Strain Relationships
- Creep
- Physical Properties
- Compressibility
- Optical Properties
- Melting Point - Heat of Fusion
- Surface Tension
- Viscosity
- Oxidation of Aluminum
- Gases and Aluminum
- Chapter 2.. Constitution of Alloys
- Types of Systems
- Equilibrium and Nonequilibrium Solidification
- Microstructures of Rapidly Solidified Aluminum Alloys
- Phase Diagrams and Thermodynamics
- Major Alloy Systems
- Low Level Alloy Systems
- Chapter 3.. Microstructure of Alloys
- Light Microscopy of Wrought Alloys
- Quantitative Metallography
- Scanning Electron Microscopy (SEM)
- Transmission Electron Microscopy (TEM)
- Chapter 4.. Work Hardening, Recovery, Recrystallization, and Grain Growth
- Work Hardening
- Annealing
- Crystallographic Texture
- Surface Effects of Deformation
- Chapter 5.. Metallurgy of Heat Treatment and General Principles of Precipitation Hardening
- Nature of Precipitates and Sources of Hardening
- Precipitation in Specific Alloy Systems
- Ingot Preheating Treatments
- Annealing
- Solution Heat Treating
- Quenching
- Aging at Room Temperature (Natural Aging)
- Precipitation Heat Treating (Artificial Aging)
- Artificial Aging of 7XXX Alloys
- Dimensional Changes in Heat Treating
- Chapter 6.. Effects of Alloying Elements and Impurities on Properties
- Physical Properties
- Mechanical Properties and Processing
- Specific Alloying Elements and Impurities
- Chapter 7.. Corrosion Behavior
- General Corrosion Behavior
- Types of Corrosion
- Influence of Microstructure on Corrosion
- Environmental Factors
- Preventive Measures
- Chapter 8.. Properties of Commercial Casting Alloys
- Major Alloy Systems
- Minor Alloying and Impurity Elements
- Alloy Development
- Chapter 9.. Properties of Commercial Wrought Alloys
- Alloy and Temper Designations
- Non-Heat Treatable Alloys
- Heat Treatable Alloys
- Applications of Wrought Alloys
- Effect of Directionality on Properties
- Chapter 10.. Aluminum Powder and Powder Metallurgy Products
- Aluminum Particles
- Applications of Aluminum Particulates and Powders
- Pressed and Sintered Powder Metallurgy Parts
- High-Strength Wrought Powder Metallurgy Products
- Index
